AVAILABLE IN– TWO COLORS, TWO MODELS
The tempered glass panel allows showing off the internal components.
LANCOOL III
Black
White
Comes equipped with 4 x 140mm high airflow PWM fans that provide strong out-of-box cooling performance.
Front Intake Fan –
200~1800 RPM / 83.5 CFM /2.3 mm H2O
Rear Exhaust Fan
200~1800 RPM / 83.5 CFM / 2.3 mm H2O
LANCOOL III RGB
Black
White
Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan.
Front Intake ARGB Fan
300~1650 RPM / 83.5 CFM / 2.3 mm H2O
Rear Exhaust Fan
200~1800 RPM / 83.5 CFM / 2.3 mm H2O
Offering 7 colors and 8 lighting modes (the 8th mode is MB SYNC), the included ARGB controller can be operated via the front IO C and M buttons and can extend its control for 3 additional ARGB devices.
EXTREME AIRFLOW CRAFTMANSHIP
A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.
Top and 2x Bottom Side Panels
Front Panel
The 51% porosity offers an ample direct fresh air intake
HINGED PANELS ALL AROUND
The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.
FLEXIBLE CONFIGURATION
With ample interior room, the LANCOOL III can offer different cooling and usage scenarios
AIR Cooling
With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.
AIO Cooling
With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.
Custom Water Cooling
SPACIOUS COOLING SUPPORT
The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.
Multi-way Front Fan/Radiator Bracket
The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Note: The two thumbscrews (one in front, one on the left side) are applied for transportation security
Removable Top Fan Bracket
The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.
420mm Radiator *
TOP
- Do not remove the top fan bracket
- Orient the radiator tubing side toward the rear of the chassis
- Remove the rear 140mm fan for radiator installation
Modular PSU Shroud Bracket – Fan/ Pump/ SSD
The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.
Back-and-forth adjustability to accommodate for different 360 radiator orientations.
Included mounting points for 3 × 2.5” SSDs.
Additional pump/reservoir combos mounting points are provided.
Side Multi-Purpose Mounting Slots
Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.
EXTENSIVE STORAGE CAPACITY
Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.
❶
Adjustable Drive Cage
2 adjustable drive cages (each for 2 x 3.5” HDDs or 2 x 2.5” SSDs) can be individually removed or adjusted.
❷
Toolless SSD tray
Two spring-loaded SDD trays located behind the motherboard tray allow for a toolless installation of the drives.
❸
Side SSD tray
The side-mounted SSD trays located inside the right PSU shroud panel can support up to 3 x 2.5” SSDs or can be removed to improve airflow.
Clearance for front radiator
Clearance for long PSU
ree space for unobstructed airflow
Standard mode for drive installation
COMPREHENSIVE CABLE MANAGEMENT
As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.
Sliding Cable Routing Cover
Standard ATX Motherboard
E-ATX Motherboard (width 280mm)
REVERSIBLE FRONT I/O
➊ Light Color Button (C)
7 static colors
➋ Light Mode Button (M)
8 lighting effects
8th sync to motherboard or L-Connect
Press 3 seconds to turn off the lighting
➌ Audio ➍ Reset Button ➎ Power Button ➏ USB 3.0 ➐ USB Type C
➊ USB 3.0 ➋ Power Button ➌ Reset Button ➍ Audio ➎ USB Type C
FRIENDLY PSU INSTALLATION
PRODUCT NAME | LANCOOL III | LANCOOL III | ||
---|---|---|---|---|
MODEL | LANCOOL 3-X BLACK | LANCOOL 3-W WHITE | LANCOOL 3R-X BLACK | LANCOOL 3R-W WHITE |
COLOR | Black | White | Black | White |
DIMENSION | (D) 526mm x (W) 238mm x (H) 523mm | |||
MOTHERBOARD | E-ATX (width: under 280mm)/ATX/MICRO-ATX/MINI-ITX | |||
PSU CLEARANCE | ATX (Under 220mm) | |||
MATERIALS | Aluminum (Door handles) 0.8mm SGCC (exterior and interior) 4.0mm tempered glass (both sides) |
|||
INCLUDED FANS | Front: 3 x 140mm PWM fans (200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A) Rear: 1x 140mm PWM fan (200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A) |
Front: 3 x 140mm ARGB PWM fans (300~1650 RPM / DC 12 V, 0.23A, 0.35A / 83.5 CFM / 2.3 mm H2O / 33dB-A) Rear: 1x 140mm PWM fan (200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A) |
||
FAN SUPPORT | Front (multi-way fan/radiator bracket): 3 x 120mm or 3 x 140mm Top: 3 x 120 or 3 x 140mm Rear: 1 x 120mm or 140mm Above PSU Chamber: 3 x 120mm |
|||
RADIATOR SUPPORT | Front: 360mm or 420mm Top: 360mm or 420mm Above PSU Chamber: 360mm |
|||
GPU LENGTH CLEARANCE | 435mm (Max) | |||
CPU HEIGHT CLEARANCE | 187mm (Max) | |||
STORAGE | Behind MB tray: 2 x 2.5″ SSD Behind right side PSU shroud panel: 3 x 2.5’’ SSD Hard drive cage: 4 x 3.5″ HDD/2.5″ SSD Above PSU chamber: 3 x 2.5″ SSD |
|||
EXPANSION SLOT | 8 | |||
DUST FILTERS | 1 x Bottom (Tray) | |||
WARRANTY | 1 year |